Panasonic VL-SW250BX User Manual
Doorphone
18
Answering a call
When you receive a call from a door station, the main monitor station and the sub monitor station ring and the
TALK indicators fl ash. You can monitor the visitor on the monitor display before answering a call.
TALK indicators fl ash. You can monitor the visitor on the monitor display before answering a call.
XX
{
OFF}
{
PAGE}
{
MENU}
{
VOLUME}
{
TALK} and
indicator
Microphone
{
VOICE CHANGER}
Microphone
TALK indicator
{
TALK}
{
D}
{
OFF}
{
MENU}
{
▲
}
{▲} { ▲ } {
▲
}
1
When a ringer tone is heard, press {TALK}.
2
Speak to the visitor within 50 cm of the microphone.
L
Speak alternately with the visitor.
(If you and the visitor speak at the same time, you will not hear each other.)
(If you and the visitor speak at the same time, you will not hear each other.)
3
To end the conversation, press {OFF}.
Note:
L
L
If you do not answer a door call within 30 seconds, the display will turn off.
A conversation will be automatically disconnected in about 90 seconds and then the display will turn off.
A conversation will be automatically disconnected in about 90 seconds and then the display will turn off.
L
The image taken by the door station is automatically recorded (page 24).
When using an additional door station:
L
L
When you receive another call from the other door station during a conversation, see page 22.
Answering a call by voice sensor (Voice answer mode)
This mode allows you to answer a call by voice without pressing {TALK}. (You can operate this feature in the
same way by using either the main monitor station or the sub monitor station.)
Voice answer must be set “ON” beforehand (page 37, 41).
same way by using either the main monitor station or the sub monitor station.)
Voice answer must be set “ON” beforehand (page 37, 41).
1
When a ringer tone is heard, answer with a clear voice such as “Yes?” or “Hello?”.
L
When a beep sounds, you can talk to the visitor.
Note:
L
L
Make sure you are within about 50 cm of the main monitor station or the sub monitor station.
L
The visitor cannot hear your initial reply when you answer with voice.
L
Your initial reply should be brief (less than 1 second), otherwise the voice answer mode will not start.
L
If a visitor calls you, a loud, brief sound (such as a dog’s bark) may start the voice answer mode even though
you have not replied by voice.
you have not replied by voice.
L
When you locate the sub monitor station near the main monitor station, the voice answer mode may be started
by a ringer tone.
by a ringer tone.
L
The voice answer mode is also available for paging calls.
SW250BX_OI.indb 18
SW250BX_OI.indb 18
2010/08/25 15:58:31
2010/08/25 15:58:31