Panasonic VL-SW250BX User Manual
Doorphone
20
If it is diffi cult to hear the visitor’s voice due to noise (Press-to-talk mode)
You can speak with the visitor alternately by pressing {TALK} to switch between the talking mode and the
receiving mode. (You can operate this feature in the same way by using either the main monitor station or the
sub monitor station.)
receiving mode. (You can operate this feature in the same way by using either the main monitor station or the
sub monitor station.)
1
Press and hold {TALK} for about 2 seconds during a call until a beep sounds.
L
appears on the main monitor station.
appears on the sub monitor station.
2
To speak to the visitor:
Speak while pressing and holding {TALK}.
Speak while pressing and holding {TALK}.
To hear the visitor:
Release {TALK}.
Release {TALK}.
Note:
L
L
Press-to-talk mode is canceled after the conversation ends.
Using {DOOR KEY
}
button
When a separate door opener is connected to the main monitor station, you can open the door using the main
monitor station or the sub monitor station.
monitor station or the sub monitor station.
1
To open the door, press {DOOR KEY} after answering a call from the door station or while monitoring images
taken by the door station.
taken by the door station.
L
When the door is opened,
is displayed.
L
Door opener allows you to open the door for the time specifi ed in “Setting {DOOR KEY} button” on page
35.
35.
Note:
L
L
You cannot open the door while receiving a call from the door station.
L
When using 2 door openers:
You can open door 1 (door opener 1) when you are talking with door station 1 or monitoring it. You can open
door 2 (door opener 2) when you are talking with door station 2 or monitoring it.
door 2 (door opener 2) when you are talking with door station 2 or monitoring it.
SW250BX_OI.indb 20
SW250BX_OI.indb 20
2010/08/25 15:58:32
2010/08/25 15:58:32