Panasonic VL-SW250BX User Manual
Doorphone
23
Monitoring the outside (Door station monitor)
You can monitor the sound and image taken by the door station.
L
L
If an optional lobby station is connected to the main monitor station (page 4), you cannot monitor outside
where the lobby station is located.
where the lobby station is located.
XX
{
TALK}
{
OFF}
{
PAGE}
{
MENU}
{
VOLUME}
{
MONITOR}
{
D}
{
OFF}
{
TALK}
{
▲
}
{▲}
{
MONITOR}
1
Press {MONITOR}.
L
The outside image will be shown on the display, and you will hear the sound from outside.
(The sound from your end will not be heard at the door station.)
(The sound from your end will not be heard at the door station.)
L
To speak to the other party at the door station, press {TALK}.
2
To end monitoring, press {OFF}.
N
When installing 2 door stations
When you press {MONITOR} in step 1, the following is displayed.
Select the desired door station:
Select the desired door station:
: Press {VOLUME} (
▲
) or {PAGE} (▲), then
press {MENU} (OK).
: Press {▼} or {▲}, then press {D} (OK).
Note:
L
L
Monitoring will automatically end in about 90 seconds.
L
You can perform the following operations during monitoring. For more details, see page 19.
– Scrolling an image right or left on the sub monitor station
– Adjusting the display brightness
– Hiding the operation guidance
– Adjusting the speaker volume
– Adjusting the display brightness
– Hiding the operation guidance
– Adjusting the speaker volume
When using an additional door station:
L
L
When you receive another call from the other door station while monitoring, see page 22.
(Example: Main monitor station)
SELECT DOOR STATION
DOOR STATION 1
DOOR STATION 2
SW250BX_OI.indb 23
SW250BX_OI.indb 23
2010/08/25 15:58:33
2010/08/25 15:58:33