Honeywell HD-DVR-1004 User Manual
Honeywell
65
•
DST: Here you can set DST time and date. Please enable DST function
and then click set button. You can see an interface is shown as in
and then click set button. You can see an interface is shown as in
. Here you can set start time and end time by setting corresponding
, enable date button, you can see an interface
is shown as in
. Here you can set start time and end time by
setting corresponding date setup.
•
Time format: There are two types: 24-hour mode or 12-hour mode.
•
Language: System supports various languages: Chinese (simplified),
Chinese (Traditional), English, Italian, Japanese, French, Spanish (All
languages listed here are optional. Slight difference may be found in
various series.)
Chinese (Traditional), English, Italian, Japanese, French, Spanish (All
languages listed here are optional. Slight difference may be found in
various series.)
•
HDD full: Here you can select the working mode when the hard disk is
full. There are two options: Stop recording or overwrite.
full. There are two options: Stop recording or overwrite.
•
Pack duration: Here is for you to specify the maximum length of each
record file from 1 to 120 minutes. Default value is 60 minutes. The
change will take effect in the new record file.
record file from 1 to 120 minutes. Default value is 60 minutes. The
change will take effect in the new record file.
•
DVR No: When you are using one remote control to control several
DVRs, you can give a name to each DVR for your management.
DVRs, you can give a name to each DVR for your management.
•
Video standard: There are two formats: NTSC and PAL.
•
Auto logout: Here is for you to set auto logout interval once login user
remains inactive for a specified time. Value ranges from 0 to 60 minutes.
remains inactive for a specified time. Value ranges from 0 to 60 minutes.
Note
•
Since system time is very important, do not modify time
casually unless there is a must!
casually unless there is a must!
•
Before your time modification, please stop record
operation first!
operation first!
After completing all the setups click Save. The system will return to the
previous menu.
previous menu.