Panasonic VL-SV30BX User Manual

Page of 32
Help
27
N
 Conversation
Problem
Cause & Solution
Page
Sound cuts in/out or fades.
L
The surroundings of the main monitor station or the door 
station are noisy. Try “Press-to-talk” mode.
11
Your voice cannot be heard by 
the outside visitor. (Visitor’s voice 
can be heard.)
L
When 
 is displayed, the “Press-to-talk” mode is activated. 
Only while pressing {TALK/OFF}, the outside visitor can hear 
your voice.
11
Voice answer mode does not 
operate properly.
L
Your voice is not loud enough or your initial reply is too long 
(must be less than 1 second). Try a different voice volume or 
change the length of your answer until the main monitor station  
beeps.
10
N
 Ringer tone
Problem
Cause & Solution
Page
The ringer tone for the door 
station does not sound.
L
The ringer volume is turned off. Turn it on.
18
N
 Others
Problem
Cause & Solution
Page
The main monitor station and the 
door station do not work during a 
power failure.
L
 The unit does not work during a power failure. The date and 
time may be reset to the default setting after a power failure. In 
this case, set the date and time using the main monitor station 
again.
9
L
 “DEMO MODE” is displayed.
L
 You cannot answer the call.
L
 Demo mode is activated. Change the setting to “OFF”.
23
L
 The unit does not work with 
correct operations.
L
 The unit does not work properly.
L
Perform the following operation (Reset).
–  Press and hold {MENU} and {PLAY} together for about 3 
seconds. (Recorded images and the program settings are 
not affected.)
The main monitor station does 
not work.
L
The display monitor does not 
display anything.
L
The ringer tone does not sound.
L
No voices can be heard.
L
The plug is disconnected from the power outlet, or it is about to 
be disconnected. Disconnect the plug, and connect it securely 
again. If this does not solve the problem, contact our service 
personnel.
SV30BX_OI.indb   27
SV30BX_OI.indb   27
2010/10/22   17:21:49
2010/10/22   17:21:49