Honeywell HD-16DVR-C User Manual

Honeywell 

 

123 

alarm device when alarm occurs.   

Alarm 
Latch 

System can delay the alarm output for specified time after 
alarm ended. The value ranges from 10 seconds to 300 
seconds.  

Record 
Channel 

System auto activates current channel to record once alarm 
occurs (working with alarm activation function). Please note 
current device shall be in auto record mode (see 

 on 

page 

35 and Manual Record

 on page 

Record 
Latch 

System can delay the record for specified time after alarm 
ended. The value ranges from 10s to 300s.  

Send Email 

Enable email function. System can send out email to alert you 
when alarm occurs and ends.  

Tour  

Display video in local monitor window by tour. If there are 
record channels selected, only the record channels will be 
displayed in the tour. 

PTZ 
activation  

Here you can set PTZ movement when alarm occurs. Such 
as go to preset x when there is an alarm. 
The PTZ configuration events include preset, auto-tour, and 
pattern. 

Copy  

It is a menu shortcut button. You can copy the current 
channel setup to one or more (all) channels. 

Save 

You can click the save button after you complete setup for 
one channel, or you can complete the whole setup and then 
click the save button. 

Refresh  

Click this button to get the device’s latest configuration 
information. 

Analyzes the video. The system enables the motion detection alarm when it 
detects the motion reaches the specified sensitivity. 

The detection interface is shown as in