Honeywell HD-16DVR-C User Manual

Honeywell 

 

127 

Please refer to the following sheet for detailed information. 

Channel  

You can select monitor channel from the dropdown list. . 

Protocol 

Select the corresponding dome protocol (such as PELCOD), 

Address 

Set corresponding dome address. Default value is 1. Please 
note your setup here shall comply with your dome address; 
otherwise you can not control the speed dome. 

Baud Rate 

Select the dome baud rate. Default setup is 9600. 

Data Bit  

Default setup is 8. Please set according to the speed dome dial 
switch setup.  

Stop bit  

Default setup is 1. Please set according to the speed dome dial 
switch setup. 

Parity  

Default setup is none. Please set according to the speed dome 
dial switch setup. 

Save  

You can click the save button after you complete setup for one 
channel, or you can complete the whole setup and then click 
the save button. 

Refresh  

Click this button to get the device’s latest configuration 
information. 

Default: Restore the factory default settings. You can select corresponding 
items. 

Backup: Export current configuration to local PC or import configuration 
from current PC. 

Please refer to 

. 

Please note that the system cannot restore some information such as the 
network IP address.