Epson DH200 User Manual

8

To power the system ON/OFF:
1. Connect the power cable to the port on the rear panel.
2. Press the 

 button on the front panel or remote control.

You need to press the Power button for initial startup 

only

. The system will load the live 

viewing screen on subsequent resets.

You will need to input your system password (by default, 

) to power off the system.

By default, the system has Quick Setup enabled. Quick Setup lets you quickly adjust the time and 
record mode on the system. The system menu will appear as the Quick Setup menu with only Time 
and Record options available.

Using Quick Setup

Use Quick Setup to set the time and configure basic recording settings.

To set the time:
1. Under the Time tab, select 

 and press the 

 button. Enter the month, day, and year.

2. Select 

 and enter the time (hh/mm/ss).

If using the mouse, you will enter the date and time with the Virtual Keyboard.

3. Press the 

 button to save your changes.

To configure recording settings:
1. Stop ALL RECORDING on the system. Enter your system password (by default, 000000).
2. Under the RECORD tab, select RECORD MODE and select one of the following: CIF 4CH, 

FIELD 4CH, FRAME 4CH, CIF 8CH, FIELD 8CH, FRAME 8CH, or CIF + FRAME.

If "CIF + FRAME" recording mode is selected, only channel 1 will record in frame—the 

remaining channels will record in CIF.

3. Under the RECORD tab, select RECORDING DAYS. Press the +/ - buttons and select 12 

HOURS, 1~6 DAYS, 1~20 WEEKS, or NONE.

Figure 2.0 Quick Setup menu