Epson DH200 User Manual

79

Use the Video port (BNC) on the rear panel of the system to use the Monitor Out function. Monitor 
Out displays the exact on-screen display of the system.

Use the Spot port (BNC) to use the Spot Out function. Spot Out displays connected cameras on the 
system.

NOTE: A BNC-to-RCA adapter (not included) is required to connect a monitor with RCA inputs.

To use spot out functions:

1. With a spot monitor connected, press the 

 button on 

the remote control or Virtual Remote followed by the numeric 
button for the channel you wish to view (full-screen).

2. Press the 

 button twice to begin Auto Sequence (by 

default, Spot Out on the system is set to Auto Sequence).

When an alarm is triggered, Spot Out will display the triggered 
channel in full-screen.

(not included)

(not included)

Figure 43.0 Spot Out button