Humax 525p User Manual

117

C o n n e c t i n g t o a H o m e N e t w o r k U s i n g a W i r e l e s s A d a p t e r

Connecting to a Home Network Using a
Wireless Adapter

Use this example if you have a home network that includes a wireless access point (WAP)
or wireless router, or for each Recorder in a wireless peer-to-peer network. On most home
networks, the wireless access point is part of an integrated hub/router and home
gateway.You can leave your Recorder plugged in while you connect a network adapter.

To connect a wireless network adapter to your Recorder:

1. Connect to the adapter. If it is not already attached, connect one end of the USB

cable that came with your wireless network adapter to the port located on the back of
the adapter.

2. Connect to the Recorder. Connect the other end of the USB cable to the USB port on

the Recorder. The power light on the wireless adapter may come on before the cable is
completely inserted into the USB slot. Make sure you push the cable all the way into
the USB slot.

Do not use the CDs that are included

with your network adapters to set

up your Recorders. These CDs are

intended to load drivers and network

adapter software on your personal

computer.

The cable may already be attached

to your wireless network adapter.