Humax 525p User Manual

C o m p l e t i n g   t h e   R e c o r d e r ’ s   N e t w o r k   S e t t i n g s

, skip to“TCP/IP 

If you have a wireless home network, and have connected a wireless network adapter to 
your Recorder, as described on page 117, you are ready to complete Wireless Settings for 
a home network.

To get to Wireless Settings: press the TiVo button on the remote control to go to TiVo 
Central, then select Messages & Setup, then Settings, then Phone & Network Setup, then 
“Edit phone or network settings,” then Wireless Settings.

This is the first Wireless Settings screen you will see. It lists 

information you need to complete wireless settings. You can find all this information in 
the configuration settings of your network’s wireless access point or router.

If your wireless network does not use encryption (WEP), then you only need to provide a 
wireless network name; you do not need to provide a password format or password.

When you are ready to continue, press SELECT on your remote control.

You must now provide the name of 

your wireless network. Wireless networks have a network name (sometimes called an 
SSID for service set identifier). A wireless network may be open or closed. Open wireless 
networks broadcast their network names, allowing devices in their vicinity to identify 
them automatically. Closed wireless networks do not broadcast their network names, so 
they cannot be identified automatically.

®