EverFocus 264x2 User Manual
44
DHCP: DHCP server in LAN will automatically assign IP for network connection.
PPPoE:
IP Address: This field shows the current IP Address for the DVR. A Fixed IP address must be set manually.
If DHCP or PPPoE is selected, this value will be assigned automatically.
If DHCP or PPPoE is selected, this value will be assigned automatically.
Subnet Mask: This field shows the subnet mask for your network so the DVR will be recognized within the
network. If DHCP or PPPoE is selected, this value will be assigned automatically.
network. If DHCP or PPPoE is selected, this value will be assigned automatically.
Gateway: This field shows the gateway for your network so the DVR will be recognized within the network.
If DHCP or PPPoE is selected, this value will be assigned automatically.
If DHCP or PPPoE is selected, this value will be assigned automatically.
Apply: Press “Apply” button to save and apply Express settings to DVR. The system will automatically
adjust recording frame rate according to settings. The following message will pop up, press YES to change
Resolution, Recording frame rate and Quality depending on your express setting.
adjust recording frame rate according to settings. The following message will pop up, press YES to change
Resolution, Recording frame rate and Quality depending on your express setting.