Genie GDVRH-608 User Manual

39 

 

   

 

1.  The menus are displayed with options in the left-hand column and settings in the 

right hand column.    A cursor (highlighted menu) can be moved using the directional 

buttons [

] .   

2.  Change the options shown below using the [DEC/INC] buttons. 

1) 

Schedule Use: This enables or disables Night Zone. By default “OFF”. 

2) 

Boot up Record: The DVR starts recording without pressing the [REC] button 

when it is set to “ON”.  

3) 

Disk Overwrite: Selects the record policy of the hard disk drive.   

-  ON: By default, the hard disk drive overwrites from the beginning when it 

becomes full.                                                           

- OFF: Stops recording when the HDD is full. 

4) 

Auto Delete: Allows you to configure when the DVR automatically deletes all 

data from HDD. It leaves the data for a selected duration from the current time.   

[NONE 

 12HOURS  1DAY~ 6DAYS  1WEEK ~ 4WEEKS-> 30 DAYS] 

5) Pre-Record: Determines the duration the DVR stores recorded video prior to 

the beginning of Event Recoding 

Determines the duration the DVR continues to record for after 

an Event detection [5SEC ~ 300 SEC]. By default 5 sec.

 

Note> 1. Alarm/Motion Duration is extended if there is another Alarm/Motion detected 

whilst Event Recording. 

  2. When recording, the Pre-Record and Post-Record will not be activated. 

 

3.  To save changes and exit the menu, press the [MENU] button. 

To exit the menu without making changes, press the [CANCEL] button.