Genie GDVRH-608 User Manual

67 

 

When an Alarm is triggered, Motion detected or Video Loss occurs, this DVR sends a preset 

command to a PTZ camera. The PTZ option must be enabled and a protocol must be 

assigned to the camera channel.   

1.  Channel:    Select desired PTZ camera.   

2.  Active:  Configure PTZ action [ NONE 

 GOTO  TOUR ] and Preset number or Tour 

group when an event is detected.     

3.  Inactive: 

Select Camera position after the event duration expires.   

4. Event 

Edit. 

 

Press [enter] to edit multiple events. The menus are displayed with options in the left-

hand column and settings in the right hand column.    A cursor (highlighted menu) can 

be moved using the directional buttons [

] on the IR remote or front panel.     

    <Note> Do NOT set up Motion detection on the PTZ camera used for a PTZ event. The 

signal will be looped.   

 

5 . Save changes and exit the menu, press the [MENU] button.   

Exit the menu without making changes, press the [CANCEL] button.