Genie GDVRH-604 User Manual

29 

 

 

1. LOG IN/OUT. 
 

You must log on to the DVR with valid password to operate the DVR. By default, it comes 

with one login account; ADMIN and the default password is “000000”.  

 

<Note > If you are logging on for the first time, the system does not prompt you to change 

the default password. Therefore, it’s strongly recommended to change the “PASSWORD” 

when you install the DVR. Refer to [System Setup]. 

 

1. Login  

1) On the front panel or remote control, press the power button.   

2) When the DVR is powered on, it will start to scan DVR status.   

3) Live Viewing screen will appear after initialization about 50sec. It can be delayed 

when you have defect HDD, it will try to fix for logical problem but it will show you 

warning message for physical problem. 

4) On the front panel or remote control, press Login. Using the mouse, click wherever.   

the login dialog box pops up. 

5) Login Icon 

 

will be displayed on status bar.   

 

2. Logout 

On the front panel or remote control, press LOGIN. Using the mouse, click wherever 

on monitor, Virtual remote control will be appeared. The login icon will be 

disappeared on starts bar, indication you are logged off.