Genie GDVRH-604 User Manual

74 

 

 

 

PTZ control is available for supported third-party dome cameras. The PTZ option must be 

configured for each camera channel. For PTZ setup, refer to Camera Menu> PTZ setup.  

 

The layout of the PTZ interface conforms to the layout of the front of the DVR or the remote 

controller.  Menu button is the guide anchor position for all other buttons.  When in PTZ 

interface mode, all buttons are used for the PTZ related operation. 

 

1) 

To activate the Pan/Tilt Control, select the full screen display of the camera you wish 

to control.

 

2) 

Then press the [

] button. A shortcut Menu box pops up, as shown below.

 

   

 

 

[ENTER] 

[CANCEL]  

 Press this button to display “HELP” Menu. Press [ENTER] Button again, or 

[CANCEL] button to cancel Help Menu. 

 

 Press this button to cancel “PAN/TITL” Operation. 

 

[MENU] Button 

 PTZ camera control interface is extended to use all functions. Press this 

button again to go to the short-cut menu.   

 

 

 To Tilt Up and Down. 

 To Pan Right and Left. 

<Note  > Please Refer to the Help Menu for specific