GE Digital Video Multiplexer Recorder User Manual

0150-0229D 

52 

Kalatel DVMRe StoreSafe 

 

q  Main Menu 

An ethernet connection can be used to connect to the unit from a  
PC for the viewing of live or recorded images.  Use this menu to  
configure the Ethernet communications settings. Select from the  
following: 

Ethernet:  Select Enable or Disable. 

Hostname: Not selectable. Pulled from the systems serial number. 

DHCP: Select Enable or Disable. Enables dynamic IP addressing. 
When DHCP is enabled, the IP address, Subnet Mask, Gateway,  
and Server fields are dynamically addressed. 

Name Service: Select from Disable or WINS.  Enabling WINS  
registers the hostname and IP address within the current Network.  
This ensures that you can connect to the Triplex by hostname  
within the network. 

IP Address / Subnet Mask / Gateway:  Consult with a qualified  
Network Administrator or an MIS professional to configure these  
settings if DHCP is not enabled. 

Primary Name Server / Backup Name Server: The IP addresses of the Primary and Backup Name 
Servers. Not required if DHCP is enabled. 

Print Server: Enter the Print Servers IP address to enable the Print Image function (Function and Zoom). 

TCP MTU Size: Select from Standard, 1400, and 1200. The MTU describes the maximum possible TCP 
packet size. Standard (1500) is optimal for most ethernet network environments. 

 

Use this feature to lock the front panel keypad.  While locked,  
the only operational key on the front panel is the Menu button.   
To unlock the front panel, enter the Installer password and return  
to this menu. 

Highlight the item you wish to select. 

Save changes and exit the menu:  Press the Enter button. 

Exit the menu without making changes:  Press the Menu button. 

 

Factory Default Password 

16, 10-Channel 

8 1 1 1 

4-Channel 

4 1 1 1 

From the Factory Setting menu, press the Enter button.  A 
password box will appear.  Enter the Factory Default password.  
Select OK, then press the Enter button. 

The unit will reboot, returning all settings (except the time and date) 
to the factory defaults.  Due to the large size of the hard disk, the 
reboot may take several minutes.