GE Digital Video Multiplexer Recorder User Manual

 

0150-0229D 

55  

Kalatel DVMRe StoreSafe 

Alarm devices are connected via the Alarm PCB on the back panel of the unit (see section 1.7).  Each 
Alarm Input corresponds with the Camera Input of the same number.  

Front Panel Alarm LED:  The LED located to the left and above the Alarm button is lit for the duration 
of the alarm. 

Internal Buzzer:  The internal buzzer is activated until it is Silenced and Acknowledged.  This feature 
can be turned off in the menu system (see Buzzer Setup in section 3.10). 

Monitor Displays:  Discussed below in the On-screen Displays During Alarms section. 

Output Relays:  The alarm output relay is active for the duration of the alarm.   

Macro Activation:  Unit can be configured in the menu system to activate a macro when an alarm is 
detected (see Link to Macro in section 3.10). 

Record Rate:  Record Rate can be increased by recording at the Alarm Record Rate (see section 
3.10) and by Interleaved or Exclusive Recording (see Alarm Record mode in section 3.10). 

 

 

Pressing the Alarm button acknowledges to the unit that the alarm has been  
recognized and silences the internal buzzer.  This does not clear the alarm  
condition. 

Alarm Button 

 

 

 

Single Alarm:  Unit switches to a full screen display of the camera in alarm. 

Additional Alarms:  Unit switches to a sequenced display of all cameras in alarm. 

 

Single Alarm:  Unit switches to a full screen display of the camera in alarm on Monitor B. 

Additional Alarms:  Unit switches to a sequenced display of all cameras in alarm on Monitor B.