M-AUDIO II User Manual

User Guide

18

MicroTrack II

 

1    Connect the outputs of MicroTrack II so you can hear the playback  You can use any combination of the 

following:

<

Plug a pair of headphones into the 1/8” jack on MicroTrack II 

<

Connect the RCA outputs to an amplifier or mixer 

 

2    Use the [MENU] button and [NAV] wheel to navigate to the “Files” menu 

 

3    Use the [NAV] buttons to select a file to play  Press in on the [NAV] wheel to begin playback of the current 

file 

 

4   While an audio file is playing, you can:

 

 

<

Adjust the playback volume using the [VOLUME] button 

<

Delete the file by pressing the [DEL] button 

<

Immediately begin recording a new file by pressing the [REC] Button 

<

Loop playback of the file using the procedure explained in the Loop Playback section below 

<

Fast-forward through the file by holding the [NAV] wheel up 

<

Skip ahead to the next file by pressing up on the [NAV] wheel 

<  

Return to the beginning of a file by pressing down on the [NAV] wheel  If you are within the first three 
seconds of a file, pressing down will skip back to the previous file 

<

Rewind the file by holding down the [NAV] wheel  

<

Pause playback by pressing in on the [NAV] wheel  Press in again to resume playback 

 

 

<

Return to a previous file by pressing down on the [NAV] wheel 

<

Resume playback by pressing in on the [NAV] wheel