Magnavox MDR533H User Manual

• Please refer to relevant topics on “TROUBLESHOOTING”

on pages 116-120 before returning the product.

• If this unit becomes inoperative, do not try to correct

the problem by yourself. There are no user-serviceable
parts inside. Turn the unit to the standby mode, unplug
the power plug and please call our help line mentioned
on the front page to locate an Authorized Service
Center.

•  Wipe the front panel and other exterior surfaces of the 

unit with a soft cloth.

•  Never use a solvent, thinner, benzene or alcohol to clean 

the unit. Do not spray insecticide liquid near the unit.
Such chemicals may discolor the surface or damage the 
unit.

•  When a disc becomes dirty, clean it with a cleaning 

cloth. Wipe the disc from the center to out. Do not
wipe in a circular motion.

•  Do not use solvents such as benzine, thinner, 

commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.

•  If this unit still does not perform properly 

although you refer to the relevant sections and to
“TROUBLESHOOTING” in this owner's manual, the laser
optical pickup unit may be dirty. Consult your dealer
or an Authorized Service Center for inspection and
cleaning of the laser optical pickup unit.

•  Handle the discs so that fingerprints and dust do not 

adhere to the surfaces of the discs.

•  Always store the disc in its protective case when it is 

not used.

•  HDD is a precision apparatus that is susceptible 

to vibration, strong impact or dirt. Depending on
the installation environment or handling, the unit
may become partially damaged or in the worst
case, recording or replaying may not be available.
Especially while the HDD is in motion, do not subject
it to vibration or strong impact or pull out the power
plug. And if a power failure occurs, the content of the
recording / replaying program may be lost.

•  HDD rotates at high speed when in operation. Be sure 

that rotation has stopped and then move the unit
without subjecting it to strong impact or vibration.

If the remote control does not work properly, you can test
if the remote control sends out the infrared signal with
a digital camera. (With a digital camera or cellular phone 
including built-in camera.)

1 Turn on the digital camera.

2 Direct a digital camera to remote control, 

then press and hold a button on the remote 
control.

•  If infrared light appears through digital

camera, the remote control is working.

Remote Control (NC003UD) with AA (1.5 V) battery x2

RCA audio/video cables

Owner’s Manual

Quick Start Guide

RF coaxial cable

•  Cannot  guarantee about 3rd party’s remote controls.

Please contact the remote manufacturer if you have
any problem with it.

E2S05_07_08UD_MDR533_535_537H_F7_EN_v1.indd   4

E2S05_07_08UD_MDR533_535_537H_F7_EN_v1.indd   4

2012/06/15   16:47:51

2012/06/15   16:47:51