Panasonic TU-HDT105A User Manual

Page of 32
Operating Instruction Book 
TU-HDT105A
 
 
 Setting 
If you wish to reset all previous settings, you can 
ings will 
 
 
 
.6 Diagnostic 
Information 
eneral information 
about the Serial ID, software and hardware 
 
 
 
is 
. If either of the bars is 
displayed in red colour, there is a problem with 
the reception of the digital signal and the antenna and c
receiver need to be checked by a qualified antenna installer
 
 
 
801.  The picture remains on the screen while 
pe in 801. 
 
Some broadcast stations will have a message 
on the screen to tell you that closed captions 
are not available for this programme. Some 
broadcast stations give you no indication at all. 
 
 
 
 
Restore Default
 
 
use this feature to do so. Once you decide to 
restore default settings, all previous sett
be lost.  Please be very careful before you 
confirm this action. 
 
 
 
6
 
 
From here, you can get g
version on which it is operating, and display 
signal strength and quality.  
The signal strength and signal quality are shown
as separate bars.  For the digital receiver to 
function correctly, both these bars need to be 
displayed in green colour. If either of the bars 
displayed in the orange colour, there may be 
video and audio reception problems (see 
Troubleshooting)
onnection to the digital 
. See Troubleshooting 
on page 27. 
 
6.7 Teletext Operation 
Teletext is only available on certain broadcast 
channels. The time taken to display the pages 
and sub-pages is set by the teletext transmitter. 
Teletext is also used for Closed Captioning of 
television programmes for the hearing impaired. 
Closed captions can be found on Teletext Page 
you ty
 
23