Motorola DCH3416 User Manual

31

 

1.

  Connect a stereo audio cable to the AUDIO OUT L and R connectors on the DCH 

receiver and the INPUT L and R connectors on the A/V receiver. 

2.

  Connect a video cable to the video out connector on the DCH receiver and the cable/TV 

video connector on the A/V receiver. 

3.

  Connect a stereo audio cable to the VCR AUDIO OUT L and R connectors on the A/V 

receiver and the INPUT AUDIO L and R connectors on the stereo VCR. 

4.

  Connect a stereo audio cable to the OUTPUT AUDIO OUT L and R connectors on the 

stereo VCR and the VCR AUDIO IN L and R connectors on the A/V receiver.  

5.

  Connect a video cable to the input video connector on the stereo VCR and the video 

VCR OUT CONNECTOR on the A/V receiver. 

6.

  Connect a video cable to the output video connector on the stereo VCR and the video 

VCR IN connector on the A/V receiver. 

7.

  Connect a video cable to the input video connector on the Stereo TV (SDTV) and the 

TV/monitor output video connector on the A/V receiver. 

If your equipment supports it: 

•  The digital audio optical (OPTICAL S/PDIF) or digital audio (COAXIAL S/PDIF) 

audio outputs may be used in place of the stereo audio outputs (AUDIO L and R). 
In most cases these outputs offer a higher level of audio quality, including 
support for Dolby Digital 5.1 audio. 

•  S-Video connections may be used in place of the standard composite video 

connections. In most cases, S-Video offers a higher level of standard definition 
video quality than composite video. 

 on page 21.