Sony SIR-3400H User Manual
13-2
(E)
SIR-3400H / SIR-3032i / SIR-3032W
13-5. Changing the AC Voltage
Be careful to use the correct voltage since usage of an incorrect voltage can lead to a fire or failure
of the unit.
At shipping, the AC voltage is set to either 100/120 V or 220/240 V. The setting is displayed on the
sticker on the AC voltage selector switch. If you peel off the sticker and change the voltage, be sure
to always re-check the usage voltage before using.
of the unit.
At shipping, the AC voltage is set to either 100/120 V or 220/240 V. The setting is displayed on the
sticker on the AC voltage selector switch. If you peel off the sticker and change the voltage, be sure
to always re-check the usage voltage before using.
c
. When the AC voltage selector switch is set to AC 100/120 V, supplying AC 198 to 250 V may damage the
. When the AC voltage selector switch is set to AC 100/120 V, supplying AC 198 to 250 V may damage the
recording unit's internal circuitry.
. When the AC voltage selector switch is set to AC 220/240 V, the recording unit will not operate when
supplied with AC 90 to 132 V.
1
Use the AC voltage selector switch on the rear panel of the respective unit to change the voltage.
Move the switch to the selected voltage side.
Move the switch to the selected voltage side.
Left side
: 100/120 V (allowable 90 to 132 V)
Right side : 220/240 V (allowable 198 to 250 V)
13. Other Settings