Panasonic WJ-RT416 User Manual
26
Control the cameras
It is possible to operate the camera while displaying images.
Note:
To control the camera, configure the settings such as the communication type between the camera and the
recorder, protocol, etc. Refer to the installation guide of the recorder for how to configure the required settings of
the recorder.
Refer to the operating instructions of the camera for how to configure the required settings of the camera.
Depending on the models of the connected cameras, it may be impossible to control the camera or some func-
tions may be not available.
recorder, protocol, etc. Refer to the installation guide of the recorder for how to configure the required settings of
the recorder.
Refer to the operating instructions of the camera for how to configure the required settings of the camera.
Depending on the models of the connected cameras, it may be impossible to control the camera or some func-
tions may be not available.
Panning/tilting, zooming, focusing, preset position operation
Click the buttons on the right side of the control panel to control the camera.
Panning/tilting: Moves the camera horizontally (AB)/vertically (CD)
Zooming:
Zooming:
Zooms in/out of images (+: TELE, –: WIDE)
Focusing:
Adjusts the focus (+: FAR, –: NEAR)
AF:
Adjusts the focus automatically
Preset position: Moves the camera to the preset position registered in advance
Notes:
• When "Home" is selected for "Preset position", the camera will move to the home position (only when controlling
Panasonic’s camera). Refer to the operating instructions of the camera for how to configure the related settings.
• It is also possible to pan/tilt the camera by clicking on the image displayed in the image display area (only when
displaying images from Panasonic's camera on a single screen or on a 4-screen). The camera moves to position
the clicked point as the center point of its image.
the clicked point as the center point of its image.
Zooming
Preset position
Focusing
CDAB