Sony SVR-S500 User Manual
D:\DVR project\Instruction
manual\DTP\2689634111\GB12ADJ-CEK.fm
master page=left
SVR-S500
2-689-634-11(1)
46
This information screen shows the signal strength
of the broadcasts you are watching.
of the broadcasts you are watching.
1
Select “Signal Strength,” in the Technical
Information display and press ENTER.
Information display and press ENTER.
The Signal Strength display appears showing
both Tuner 1 and Tuner 2 signal strengths
along with the name of your local transmitter
and the tuned UHF channel.
both Tuner 1 and Tuner 2 signal strengths
along with the name of your local transmitter
and the tuned UHF channel.
The coloured bars indicates the signal quality.
2
Press the
M/m buttons to toggle the position
of the green cursor between the description of
Tuner 1 and Tuner 2 signal strength.
Tuner 1 and Tuner 2 signal strength.
If the signal strength is low you may need to
realign your aerial and / or to adjust the UHF
frequency.
We strongly recommend that you ask your
professional installer to arrange for the aerial
installation and frequency setting.
realign your aerial and / or to adjust the UHF
frequency.
We strongly recommend that you ask your
professional installer to arrange for the aerial
installation and frequency setting.
3
After viewing the information displayed,
press the RETURN
press the RETURN
button to come back to the
Technical Information menu.
Signal Strength
SETUP
Signal Strength
For best picture quality your Tuner 1: hannington - 29
aerial should be aligned to
provide the highest possible
signal strength.
TO REALIGN : Slowly rotate the
aerial through 360 degrees
identifying the position that gives
greatest strength.
Highest: 89%
The received signal is acceptable
12:15
Strength
Errors
61 %
Max
Tuner 2: hannington -29
Freq-
Freq+
Refresh
Strength
Errors
69 %
Max