Panasonic WJ-RT416V User Manual
62
Configure the settings relating to the camera control [Camera Control
Setup]
Setup]
Configure the communication type for the camera control and the cable compensation setting for each channel.
■ Type
Select a camera control method from the following.
Coax: Control the camera using the coaxial communica-
Select a camera control method from the following.
Coax: Control the camera using the coaxial communica-
tion. (Cam 1 - 8 are available (Cam 5-8 are available
only when an optional board is installed).)
only when an optional board is installed).)
RS485: Control the cameras using the RS485 communica-
tion.
Off: Do not control the cameras.
Default: Coax (Cam 1 - 4), PSD (Cam 5 - 16)
Default: Coax (Cam 1 - 4), PSD (Cam 5 - 16)
■ Protocol
Select "Panasonic" when "RS485" is selected for "Type".
Default: Panasonic
Select "Panasonic" when "RS485" is selected for "Type".
Default: Panasonic
■ Compensation
Select the cable length when "Coax." is selected for "Type".
(Cam 1 - 8 are available (Cam 5-8 are available only when
an optional board is installed).)
It is necessary to configure to control the camera using the
coaxial communication.
S: Suitable when the total cable length between the camera
Select the cable length when "Coax." is selected for "Type".
(Cam 1 - 8 are available (Cam 5-8 are available only when
an optional board is installed).)
It is necessary to configure to control the camera using the
coaxial communication.
S: Suitable when the total cable length between the camera
and the recorder is shorter than 500 m
M: Suitable when the total cable length between the cam-
era and the recorder is 500 - 900 m
L: Suitable when the total cable length between the camera
and the recorder is 900 - 1 200 m
Default: S
Notes:
• To display the "Camera Control Setup" page for camera
channels 9-16, click the [9-16] button.
• The setting of compensation (cable loss) will be ignored
when receiving any alarm from cameras during commu-
nication setup.
nication setup.
Important:
Stop recording before changing the settings relating to
the camera control. Otherwise, the cable compensation
setting (Comp.) may not be saved.
the camera control. Otherwise, the cable compensation
setting (Comp.) may not be saved.
Camera Control Setup
Type
Protocol
Compensation
OK
9 - 16
Cancel
Cam 1
Coax
Coax
Coax
Coax
PSD
PSD
PSD
PSD
Panasonic
Panasonic
Panasonic
Panasonic
Panasonic
Panasonic
Panasonic
Panasonic
Cam 2
Cam 3
Cam 4
Cam 5
Cam 6
Cam 7
Cam 8
S
S
S
S
S
S
S
S
Camera Control Setup
Type
Protocol
OK
1 - 8
Cancel
Cam 9
PSD
PSD
PSD
PSD
PSD
PSD
PSD
PSD
Panasonic
Panasonic
Panasonic
Panasonic
Panasonic
Panasonic
Panasonic
Panasonic
Cam 10
Cam 11
Cam 12
Cam 13
Cam 14
Cam 15
Cam 16