SVAT Electronics CVDVR200 User Manual

1. Hard Disk installation

The system supports Dual Hard Disk recording feature. Please carefully follow the

steps as below to install Hard Disk Driver. Install the Hard Disk into mobile rack

When the Hard Disk is installed, you have to lock the mobile rack so that the

DVR system can work.

1.  Press STOP button to stop recording.

2.  Turn off the power of DVR.

3.  Take out the Hard Disk from mobile rack and/or fixed hard disk rack.

4.  Insert the new Hard Disk.

5.  Lock the mobile rack again.

6.  Turn on the power of mobile rack.

7. Press REC button for recording.

When you want to install the sensor and/or alarm to the DVR, please refer to the

following picture for installation.

Connect the wire one end to sensor and the other end to the sensor terminal.

The adapter has to be inserted to the sensor when the wire is connected. If you

don t know positive or negative while installing sensor output wire, the cross test

can be done and see if it can work normally.

1.Take out the 

mobile rack.

2.Take off the 

top cover

3. If you decide to use two 

Hard Disks in the colour

mintor with the DVR system. 

you have to designate one 

as a master and the other 

as a slave. 

4. Connect the cable 

and power cord.

5.Screw the hard 

disk on.

6.Close the top cover and 

insert the mobile rack to 

colour monitor with DVR.