Pelco DX7016-060 User Manual
Pelco Manual C682M-E (11/01)
29
PATTERN
A pattern is a user-defined, viewable camera path with a definite beginning and end.
The pattern can consist of any standard pan and tilt or lens commands. Once defined the
pattern is easily activated with the press of an on-screen menu button. The pattern will run
continuously until it is deactivated with another press of the menu button.
The pattern can consist of any standard pan and tilt or lens commands. Once defined the
pattern is easily activated with the press of an on-screen menu button. The pattern will run
continuously until it is deactivated with another press of the menu button.
How to Program a Pattern
1.
Click the PTZ button in the DISPLAY Mode. The PTZ Mode appears.
2.
Select a camera.
3.
Click on P-SET and move the camera through a series of movements using the pan
and tilt, zoom, and focus commands.
and tilt, zoom, and focus commands.
4.
To stop programming the pattern, reclick the P-SET button.
5.
To run the pattern, click the P-RUN button. To stop the pattern, reclick the P-RUN button.
PRESETS
A preset is a user-defined camera position using pan and tilt, zoom, and focus commands.
The DX7000 Series DVR has programming capacity for 12 preset locations.
The DX7000 Series DVR has programming capacity for 12 preset locations.
NOTE:
The selected camera is indicated by the number displayed in the center of
the PTZ controls.
How to Move to a Preset
1.
Click the MOVE button.
2.
Click a preset button 1-12. The camera moves to the programmed preset position.