Swann SW243-9MB User Manual
19
.
HTTP PORT: This port number is used to
communicate with PC Client. The default
value is 80.
value is 80.
USER SETUP: When accessing the
DVR from a remote location you will be
prompted for a login and password. The
default is “admin” for full administrator
rights. Set “User ID” and password to setup
a user with limited rights to prevent
tampering.
prompted for a login and password. The
default is “admin” for full administrator
rights. Set “User ID” and password to setup
a user with limited rights to prevent
tampering.
DDNS SETUP：If you require an external
service to maintain a dynamic IP address
enter the user information here.
enter the user information here.