Pelco DX8116 Leaflet
Tech
Tech
Tips
Helpful Tips for Pelco Products
World Headquarters
3500 Pelco Way, Clovis, California 93612 USA
USA & Canada Tel: 800/289-9100 Fax: 800/289-9150
International Tel: 1-559/292-1981 Fax: 1-559/348-1120
www.pelco.com
3500 Pelco Way, Clovis, California 93612 USA
USA & Canada Tel: 800/289-9100 Fax: 800/289-9150
International Tel: 1-559/292-1981 Fax: 1-559/348-1120
www.pelco.com
Pelco and the Pelco logo are registered trademarks of Pelco.
Information subject to change without notice.
©Copyright 2006, Pelco. All rights reserved.
Page 1 of 1 DX8100_DX9200HDD1.fm
DX8100 DVR
DX9200HDDI SUPPORT LIMITATIONS
October 23, 2006
DX9200HDDI WORKS WITH DX8108 AND DX8116
There has been confusion recently as to whether the DX9200HDDI is compatible with the DX8100.
A SCSI card recently qualified that works with the DX8100 and DX9200HDDI, however, due to hard-
ware limitations the card only works with the DX8108 and DX8116 units.
ware limitations the card only works with the DX8108 and DX8116 units.
NOTE: The DX9200HDDI does not work with the DX8124 and DX8132 because these units
do not have a viable slot available for the SCSI card.
To connect the DX9200HDDI to the DX8100 do the following:
1. Install the optional DX8100-ISCI internal SCSI interface card in slot 2.
2. Move the main Capture card to slot 3.
This procedure will be covered in detail in the DX8100-ISCI Installation manual.