Speco Technologies 16TL User Manual

TL H.264 DVR User’s Manual

5.1.6.1

LAN Select

This item allows users to select the network type among <LAN>, <PPPoE>,

and <None>. If the internet connection is a local area network communication,

please select <LAN>. If the internet connection is a broadband medium, such

as DSL Line or cable modem, please select <PPPoE>.

PPPoE stands for Point-to-Point Protocol over Ethernet. It is a specification

for connecting the users on an Ethernet to the Internet through a common

broadband medium.

If <None> is selected, then there is no need to set further LAN or PPPoE

settings. Therefore, the second item <LAN Setup>will be inaccessible.

5.1.6.2

LAN Setup

The network related settings in the LAN Setup menu should be associated

with the network service type. Select <LAN Setup> in Network Setup menu

and press ENTER to set the parameters. The menu displays as follows.

LAN Setup

  1. DHCP
  2. IP
  3. Netmask
  4. Gateway
  5. DNS
  6. PPPoE Account
  7. PPPoE Password
  8. PPPoE Max Idle
  9. Connect At Booting
10. Network Restart

OFF

192.168.1.1

255.255.255.0

192.168.1.1

0.0.0.0

35min

Yes

DHCP

This item allows users to obtain a dynamic IP address from DHCP (Dynamic

Host Configuration Protocol) server when the DVR boots up. When using

DHCP, the settings are dynamic and will change every time the DVR power

on or off, depending on the network's setup.

If the item is enabled (ON), a dynamic IP will be assigned to

DVR-4TL/8TL/16TL. In this case, users do not need to set a static IP and the

Ethernet settings, including IP address, Netmask, Gateway, and DNS settings

will be read-only.

If the DVR is using a permanent address, disable DHCP (OFF) to manually

set IP Address, Netmask, Gateway, and DNS. See the network system

administrators or IT personnel for appropriate values.