Speco Technologies 16TL User Manual

TL H.264

DVR User’s Manua

5.1.6.3

Trigger Port

To avoid the possibility of the default service port (port 100) being blocked,

this item enables the user to change port 100 into another port. To change the

trigger port, move the cursor over <Trigger Port> and press ENTER, then

adjust the setting by UP / DOWN keys.

5.1.6.4

Email Address

This item is used to edit the e-mail address where alarm event information will

be sent. Follow these steps to setup the e-mail address.

•

Select <Email Address> from Network Setup menu and press ENTER. A

virtual keyboard displays.

•

Use Direction keys to move the cursor for selecting from characters.

•

Press ENTER to add the selected character to the entry field.

•

When it’s done, move the cursor to <OK> and press ENTER to save the

settings and exit.

5.1.6.5

SMTP Setup

Simple Mail Transfer Protocol (SMTP), a protocol for sending e-mail

messages between servers. SMTP is a relatively simple, text-based protocol

that one or more recipients of a message are specified and the message text

is transferred.

Select < SMTP Setup> from Network Setup menu and press ENTER; the

menu displays as follows.

SMTP Setup

1. Email via SMTP
2. SMTP Server
3. SMTP Port
4. SMTP Account
5. SMTP Password

Email via SMTP

The item enables users to determine if the DVR sends e-mail via SMTP.

Select <ON> to send e-mail via SMTP using direction keys; if not, select

<OFF>.