Speco Technologies 16TL User Manual

TL H.264 DVR User’s Manual

5.4.4

Per Camera Configuration

This sub-menu is used to set the Day / Night / Weekend PPS and recording

quality for each individual channel. <Preset Configuration> must be set to

<OFF> in order to access these related settings. The menu is displayed as

below in Record mode: 720×240@120PPS in NTSC / 720×288@100PPS in

PAL (for DVR-16TL).

Per Camera Config

Cameral Select

Normal PPS
Normal Qlty
Event Max PPS
Event Qlty
Event Act

Day

7.5

Mid

Best

Both

Night

7.5

Mid

Best

Both

CH1

Weekend

7.5

Mid
30

Best

Both

5.4.4.1

Camera Select

The item is used to select a desired channel for setting the parameters. Move

the cursor to <Camera Select> and press ENTER, then select a channel

using UP / DOWN keys. Press ENTER again to confirm the selection.

5.4.4.2

Normal PPS

Normal PPS is used to set the recording rate for normal status.

Please note that the total normal PPS of all channels cannot exceed the

maximum PPS of each Record mode. To increase one channel’s PPS, others’

may have to be reduced first. Event PPS is not restricted to this rule, since a

smart event scheduler will handle to the total PPS with a correct weighting.

For example, if channel 1 is set to event mode with 30PPS, the remaining 30

PPS will be equally distributed to other 15 channels, which means each

channel will be set to 2 PPS.

5.4.4.3

Normal Qlty

This item is used to set the picture size for normal status recording. The

available options are: <Low>, <Fair>, <Mid>, <High> and <Best>.

5.4.4.4

Event Max PPS

<Event Max PPS> is used to set the event recording rate for Event status.

Usually, the Event PPS is set equal to or greater than the Normal PPS. The

setting is depending on users’ application. If the Event PPS is set to <0>,

DVR-4TL/8TL/16TL will not record event video when alarms triggered.