Speco Technologies 16TL User Manual

TL H.264

DVR User’s Manua

5.6.7.6

Alarm In

This item allows users to enable/ disable alarm input detection. According to

users’ application, select <N/O> (Normal Open) or <N/C> (Normal Close) to

enable the alarm input detection, or select <OFF> to disable the detection.

If <N/C> is selected without installing any device, an alarm will be triggered

and the Event Icon will always display on the monitor until the selection is

changed to <N/O> or <OFF>, or when a device is installed.

5.6.7.7

Alarm Out

This item allows users to enable/ disable the alarm output on the selected

channel to activate the relay. The signal can be a light or siren to caution an

alarm event. Select <ON> to enable the alarm output, or <OFF> to disable.

5.7

Database Setup

The menu displays information of internal and external HDDs. In the main

menu, select <Database Setup> and press ENTER. The following menu is

displayed.

Database Setup

1. Total Size
2. Free Size
3. Avail. Rec Time
4. Internal Disks

xxx GB

(Circular)
(Circular)

NOTE: If the detection of HDDs fails, the message “HDD fail” will be

displayed.

5.7.1

Total / Free Size of HDD

Total Size shows the total storage capacity of HDDs that have been added to

the database. Free Size indicates free storage space available for recording

in the database, or “Circular” will be shown if the DVR is set to record in

circular mode. Both of them are “read only”.

5.7.2

Available Recording Time

The Avail Rec. Time indicates the available time duration for recording. If the

DVR is set to record in circular mode, the item will show “Circular”. The

information is “read only”.