Samsung SDS-P5102/P5122 User Manual

 

main menu

main menu

Alarm Schedule

You can set the conditions and operating hours for scheduled alarms.

Using the mouse may help make setup easier.

1.  Use the up/down buttons (▲▼) in <Event> window to 

move to <Alarm Schedule>, and press [ENTER] button.

2.  Use direction buttons (▲▼_+) to move to a desired item, 

and set the value.

Alarm : Sets the alarm output method.

 `

For further information on alarm output, refer to “HDD Alarm > 

Alarm”. (Page 49)

ON : Marked in orange, and always generates alarm on 

scheduled time.

OFF : Marked in white, no alarm is generated even if an 

event occurs.

Event Sync : Marked in Blue, generates alarm only when an event occurs.

 `

When the alarm is generated on the scheduled time, you can stop the alarm by canceling the schedule.

3.  When the Alarm Schedule setup is done, press <OK>.

BACKUP

You can check the backup device and set the backup schedule by channel or by time. 

The product only supports external HDD of USB memory and USB/SATA type. (Page 114)

Setting the Backup

You can backup the desired data to a connected device.

Using the mouse may help make setup easier.

1.  Press the [MENU] button on the remote control.
2.  Use the left/right button (_ +) to select <Backup>. 

Backup menu is selected.

3.  Press the [ENTER] button. 

Logout 

Return

  All  00  01 02 03 04  05 06 07 08 09 10  11 12 13 14 15 16 17 18 19 20 21 22 23

 Sun
 Mon
 Tue
 Wed
 Thu
 Fri
 Sat
 Hol

OFF 

ON 

Event Sync

 OK 

Cancel

BEEP