Samsung SDS-P5102/P5122 User Manual

Page of 146
64_
 
main menu
main menu
Connecting and Setting the Network
Networking may differ from the connection method, check your environment before setting the connection mode.
when no router is used
Static mode
 - Internet connection : Static PPPoE, leased line, and LAN environments allows connection between the DVR 
and remote user.
 - DVR Network Settings : Set the <Connection Mode> in 
<Interface> menu of the connected DVR to <Static>.
 `
Consult your network manager for IP Address, Gateway and 
Subnet Mask.
DHCP mode
 - Internet connection : Connect the DVR directly to a cable 
modem, DHCP PPPoE modem or FTTH network.
 - DVR Network Settings : Set the <Connection Mode> in 
<Interface> menu of the connected DVR to <DHCP>.
PPPoE mode
 - Internet connection : An PPPoE modem is directly connected to the DVR, where the PPPoE connection 
requires user ID and password.
 - DVR Network Settings : Set the <Connection Mode> in 
<Interface> menu of the connected DVR to <PPPoE>.
 `
<ID> and <Password> should be the same to the PPPoE user 
information. 
If you don’t know the ID and password, consult your PPPoE service 
provider.
Connection Mode
Interface
Port
 IP Type 
Static
 Transfer Bandwidth 2Mbps
 OK 
Cancel
 IP Address 192.168.1.200
 Gateway 
192.168.1.1
 Subnet Mask 
255.255.255.0
 DNS 
Manual
 168.126.63.1
Connection Mode
Interface
Port
 IP Type 
PPPoE
 Transfer Bandwidth 600kbps
 OK 
Cancel
 IP Address 
192.168.1.200
 Gateway 
192.168.1.1
 Subnet Mask 
255.255.255.0
 DNS 
Manual 
168.126.63.1
 ID ID
 Password 
************