Clover Electronics CDR0860 User Manual

 
 

MODEL: CDR1660 / CDR0860 / CDR0460            H.264 STAND-ALONE DVR USER MANUAL V 2.6 

 

54

At the SCREEN menu, 
Double-click AUTO SEQUENCE or highlight AUTO 
SEQUENCE and then press the ENTER button and 
the AUTO SEQUENCE menu will be displayed like the 
left picture. 

Define the display duration from 0 to 10 seconds. 0 
seconds disables the specific display mode’s inclusion 
in the sequence. The default is 2 seconds. 
 
Change the value by clicking the left button of the 
mouse on each value.   

In case of using the remote controller or the front 
panel buttons, move the cursor to the desired item 
using the ▲,▼ buttons and press the ENTER button 
and then select the desired value using the 

◀

, ▶

 

buttons and press the ENTER button. 
 
To exit the AUTO SEQUENCE menu, click the X 
button or press the ESC button of the remote 
controller or the front panel. 
* ADD AUTO SINGLE:   
Select the inclusion of single channels in the 
automatic sequence.   
The default is off.

At the SCREEN menu, 

 
Double-click DISPLAY or highlight DISPLAY and then 
press the ENTER button and the DISPLAY menu will 
be displayed like the left picture. 
 
Click the X button or press the ESC button to exit from 
this screen. 
 
 
 
 
 
 

Select the display option for the remaining space on the hard disk drive. The default is ON. 
 
Click the left button of the mouse on the value. Or in case of using the remote controller or the 
front panel buttons, highlight HDD FREE SPACE using the 

 buttons and press the ENTER 

button and then move the cursor to the desired value(ON or OFF) and press the ENTER button. 

 

ON: Remaining capacity of the fixed HDDs will be displayed on the screen.