Clover Electronics CDR0860 User Manual

 
 

MODEL: CDR1660 / CDR0860 / CDR0460            H.264 STAND-ALONE DVR USER MANUAL V 2.6 

 

59

At the SCREEN menu,

 
Double-click SPOT or highlight SPOT and then press 
the ENTER button and the SPOT menu will be 
displayed like the left picture. 
 
Click the X button or press the ESC button to exit 
from this screen. 
 
 
 
 
 
 

 

 
User can select the SPOT OUTPUT type. 
There are 3 types of SPOT OUTPUT type namely MANUAL, EVENT and SEQUENCE. 
 
MANUAL: Manually select the channel of spot monitor. 
EVENT: Event channel will be displayed automatically on spot monitor. 
SEQUENCE: Every single channel will be switching and displaying in sequence. 
 

Click the left button of the mouse on the value and 
select the desired spot mode. Or in case of using the 
remote controller or the front panel buttons, highlight 
SPOT OUTPUT using the ▲,▼

 

buttons and press the 

ENTER button and then move the cursor to the 
desired spot mode using the ▲,▼

 

buttons and press 

the ENTER button.

     

The default is MANUAL. 
 
 
 
 
 
 

 

 
Define the spot monitor sequence mode time from 0

 

to 10 seconds.     

 
Click the left button of the mouse on the value and 
select the desired value. Or in case of using the 
remote controller or the front panel buttons, highlight 
SPOT DWELL TIME using the ▲,▼

 

buttons and press 

the ENTER button and then move the cursor to the 
desired spot mode using the 

◀

, ▶

 

buttons and press 

the ENTER button.

     

The default is 2 seconds.