Clover Electronics CDR0860 User Manual

 
 

MODEL: CDR1660 / CDR0860 / CDR0460            H.264 STAND-ALONE DVR USER MANUAL V 2.6 

 

79

At the LINK menu, 

 

Double-click RS-485 or highlight RS-485 and then 
press the ENTER button and you can see the RS-485 
menu like the left picture.   
 
Click the X button or press the ESC button to exit from 
this screen. 

 
 
 
 
 
 

 
 

Select the DVR’s system ID between 0 to 255. The system ID should be issued when controlling 
multiple DVRs with a keyboard controller.    The address should also be issued when controlling 
PTZ cameras from the DVR. The default ID is 1.     
Refer to chapter 8.4.1.2.1. IP ADDRESS on page 75 for setting. 

 

Select the communication speed. Available speeds are from 1200 to 57600.   
Click the left button of the mouse on the value. Or in case of using the remote controller or 
the front panel buttons, highlight BAUD RATE and press the ENTER button and then move 
the cursor to the desired value using the ▲,▼  buttons and press

 

the ENTER button.  

The default speed is 57600.     

 

Select the data bit.    Available options are 6 to 8.    The default bit is 8.     
Refer to chapter 8.4.2.2. BAUD RATE on page 79 for setting. 

Select the parity bit.    Available options are ODD, EVEN and NONE.    The default is NONE. 
Refer to chapter 8.4.2.2. BAUD RATE on page 79 for setting. 

 

Select the stop bit. Available options are 1 and 2.    The default is 1. 
Refer to chapter 8.4.2.2. BAUD RATE on page 79 for setting. 

 

The DVR is capable of sending e-mails when an event occurs to up to five different e-mail 
addresses.