Clover Electronics CDR0850 User Manual

Stand-alone DVR

 Instruction Manual

 

 

 

 

 

▫  Connection of Normal Cameras 

Connect the cameras to the Video Input (BNC connector) on the back of the unit as shown 

above [Fig. 5-3 System Connection].

 

▫  Connection of Loop Output   

The Camera or video output is available from the Video Output (Loop Output) on the back of 

the unit. (When BNC jack is connected to the Video Output, the termination resistance (75Ω) 

is automatically switched to impedance status so the external device must have termination 

resistance.) 

 

▫  Connection of Main Monitor   

Connect the composite monitor to "Main" on the upper part of BNC connector 

▫  Connection of Auxiliary Monitor   

Connect the auxiliary monitor to "Aux" on the lower part of BNC connector. The output of 

auxiliary monitor port is the same as the main monitor.   

▫  Connection of S-VHS Monitor 

Connect the S-VHS monitor cable to "S-VHS" DIN jack on the rear of the unit. Output for S-

VHS monitor is the same as that of main or auxiliary and works independently 

 

 

 

24