Clover Electronics CDR0850 User Manual

 

 

83

Up to 16 DVR systems can be controlled by only one remote controller we provided, but IDs 

should be assigned on each of the systems. You don’t have to assign any ID on the single 

unit and you can control the system with the provided remote controller without IR REMOTE 

ID, which is in the OFF mode (Skip this section). 

 

▫

  Click the IR REMOTE ID button and select one among OFF, 1 through 16 to assign an ID 

on the system by clicking the mouse.   

 

 

▫

  When an IR Remote ID is assigned on the system, click the “FREEZE” button and then on 

the remote controller, click the same channel button as assigned ID on the system to 

match the IDs between the system and the remote controller.   

  When the FREEZE button and the channel button are pressed on the remote controller,   

-   if the channel button is identical to the assigned ID, the DETECT IR ID as shown in Fig.7-     

19 will be displayed along with the IR ID number. 

-   if not, the IR ID DENIED as shown in Fig.7-20 will be displayed along with the IR ID 

number.  

DVR IR ID 

NUMBER 

 

DVR IR ID 

NUMBER