Clover Electronics CDR1650 User Manual

Stand-alone DVR

Instruction Manual

5-4.6. POWER CONNECTION

Select proper voltage (see fig 5-10) and connect to a reliable power source.

It should not be shared with other electrical equipment on the same line.

Poor performance can occur if the connected voltage is more than 10% plus or minus the

required voltage.

Frequent power cuts can cause crucial failures, so if you have an unstable power source we

recommend the use of an Uninterrupted Power Supply or other backup power source.

AC Input Voltage is AC110V 50/60Hz or AC220V 50/60Hz. AC power Source vary depends

on countries. Factory default setting is AC110V 50/60Hz.

Note

: Before you input the AC power to the system, make sure that the selector

switch conforms to the correct input voltage.

[Fig 5-10 Input power selection]