Bosch 430 User Manual

en | Quick install

Video Recorder 430/451 Series

F.01U.168.054 | v2.0 | 2012.05

Installation and Operation manual

Bosch Security Systems

To get the unit quickly operational, make the connections described below and then enter the 

relevant data in the Quick install menu. The Quick install menu appears the first time the unit 

is started.

Back panel connections for the Advanced model

Back panel connections for the Basic model

1.

Connect the cameras to the VIDEO IN BNC connectors (automatically terminated).

2.

Connect monitor A to the VGA MON A output (supporting 800x600, 1024x768, or 

1280x1024).

3.

Connect USB mouse to a USB port.

1.

Connect monitor B to the MON B BNC connector.

2.

Connect up to 4 audio signals to the AUDIO IN RCA (CINCH) inputs.

3.

Connect the AUDIO OUT RCA (CINCH) output to the monitor or an audio amplifier.

4.

Connect up to 4 ALARM IN inputs (via the supplied terminal blocks).

5.

Connect up to 4 ALARM OUT outputs (via the supplied terminal blocks).

6.

Connect a pan/tilt/zoom control unit to the RS-485 port (via the supplied screw terminal 

block).

7.

Connect to your network via the RJ-45 Ethernet port.

8.

Connect a “Bosch RS232 to Bi-phase converter” to the RS-232 port if required.

Switch on all connected equipment.

–

Connect the power cord to the unit.