Bosch 430 User Manual

Video Recorder 430/451 Series

 Configuration menu | en

Bosch Security Systems

Installation and Operation manual

F.01U.168.054 | v2.0 | 2012.05

Network - TCP/IP

1.

Enable DHCP to have the IP address, subnet mask, and default gateway assigned 

automatically by the network server.

–

If DHCP is disabled, fill in the IP address, the Subnet mask, the default Gateway, 

and the Primary DNS server address. If required, change the default HTTP port no. 

(80) to a new value.

2.

Restrict the network Bandwidth limit by entering a value between 256 Kbps and 

100 Mbps. If 256 or 512_Kbps is selected, the DVR automatically selects I-frame only 

video at 1 IPS for transmission over the low bandwidth network connection.

(A video clip is not attached to an e-mail if 256 or 512_Kbps is selected.)

3.

Enable the RTSP server to stream live video (for example, to a smart phone). If RTSP is 

enabled (on), enter a TCP/IP port number (default port 554). 

4.

ICMP is set to Off by default (ping is not available). Set ICMP to On if you are using 

Control Center software version 3.34 or lower). 

The Real Time Streaming Protocol (RTSP) feature allows live video streaming over the 

network.

If you enable this feature (RTSP server to On) and the firewall on a ADSL router is opened, 

anybody can view the cameras. There is no log-on user ID or password to protect a camera 

live image.

Your smart phone should support RTSP network protocol and includes a RTSP capable player 

application that can display H.264 video streams. The RTSP transports the remote (network)