Bosch 430 User Manual

en | Web Client Software

Video Recorder 430/451 Series

F.01U.168.054 | v2.0 | 2012.05

Installation and Operation manual

Bosch Security Systems

The Web Client Software gives full remote control of the DVR using a PC. Up to four remote 

users can access and control the unit. Remote live viewing, search, playback, and system 

configuration are provided. Remote control functions include pan, tilt, and zoom control of 

cameras, and video archiving. An on-line status overview of the connected unit is also 

provided.

To access a unit, a user must log on using the same User ID and Password used for local 

access. The Web Client will follow the permissions of the user account, restricting the 

functions available to each remote user; for example, the ability to archive video. See 

Section 5 Operating instructions, page 27 chapter for more details on User Levels.

To use the Web Client, the unit and the PC must be able to connect via a TCP/IP network 

connection. Follow the instructions in Section 6.5 Network, page 61 to ensure the unit can be 

reached on the Network.

Operating platform: A PC running Windows XP, Windows Vista, or Windows 7.

For the Configuration Tool, the recommended PC requirements are:

–

Processor: Intel Core Duo, 2.0 GHz or comparable

–

RAM memory: 2048 MB

–

Free hard disk space: 10 MB

–

Graphics card: NVIDIA GeForce 8600 or higher

–

Network interface: 10/100-BaseT

–

Web Browser: Internet Explorer 7, 8 or 9

The video decoder and playback controller is automatically installed on the PC the first time 

the user connects the PC to the DVR:

1.

Open Internet Explorer.

2.

In the address bar, type the address of the unit.

–

This can be either the IP address or a DDNS address, if enabled on the unit.

3.

Internet Explorer will prompt to install the OCX software that is used to show live and 

playback video.

4.

Once installed, the screen will refresh and prompt for a User ID and Password.

–

Once installed on a PC, the Web Client will not need to install the OCX again unless 

a new version is released with a new unit firmware.