Invacare 6808A User Manual

4. Install a socket screw into the head end and foot end mounting pins and tighten

securely.

5. Securely tighten the hex bolts and locknuts that secure the pivot brackets to the bed

frame.

6. Repeat STEPS 3-6 for the opposite bed rail.

Installing 6815A, 6816A and 6803A Bed Rails

NOTE: For this procedure, refer to FIGURE 2.
1. Raise the mattress deck to which the bed rail will be attached.
2. Locate the proper mounting holes on the bed to install the bed rails. Refer to Detail “B”

of FIGURE 2.

3. Position the mounting bracket on the mattress deck. Refer to Detail “B” of FIGURE 2.
4. Secure the mounting bracket to the mattress deck with the two hex bolts and locknuts.
5. Install the bed rail to the mounting bracket by sliding the mounting pin of the bed rail

through the pivot tube.

NOTE: Ensure that the release lever is pointing towards the foot end of the bed.

FIGURE 2 Installing 6815A, 6816A and 6803A Bed Rails

Release Lever

(Towards the foot

end of the bed)

Bed Rail

Socket

Screw

Mounting

Bracket

Hex Bolt

Locknut

Mattress

Deck

Attach Head End Crossmember Here

Bed Rail

Mattress

Deck

Mounting

Bracket

Socket Screw

DETAIL “B” - MOUNTING HOLE

LOCATION FOR MOUNTING

BRACKETS

DETAIL “A” - SIDE VIEW OF BED RAIL

Mounting Holes for

Mounting Bracket

Head End

Foot End

Mounting Pin

Crossmember

(Head End Only)

Mounting

Pivot Tube

Pivot

Tube