Clover Electronics LCD22168 User Manual

5. Installation

5-4. Installation

5-4.1. Camera Connection

▫ Connection of 6pin MINI DIN Cameras

Connect the supplied cameras to the Camera Input (6pin mini DIN jack) on the back of the

system as shown in [Fig. 5-2 Rear View].

▫ Connection of BNC Cameras

Connect the BNC cameras (not included) to the Camera Input (BNC connector) on the back

of the system as shown in [Fig. 5-2 Rear View].

5-4.2. Installation of the Monitor

[Fig. 5-4-1 Releasing the Lever]

[Fig. 5-4-2 Locking the Lever]

▫ Desktop

Pull the Lever to the left as shown in

[Fig.5-4-1]

and move the panel forward or backward until

getting the proper angle of panel (screen) for viewing.

- Release the Lever and push it to the right as shown in

[Fig.5-4-2]

for locking the mounting

bracket.

▫ Installation of the system on the wall

Remove the screw cover on the top of the mounting bracket.

- Place the system on the flat surface with soft fabric and set the proper angle of panel