Philips MO51-00K51-A015 Leaflet

MO51-00K51-A015

 

 

Tools Required: Phillips screwdriver, 5/32” Hex Key wrench

 

 Recumbent Models

 Kit Required

 9500HR

 AK51-00072-0000

 9100, 5500HR, 4500

 AK51-00074-0000

 
 Step 1
 Using a Hex Key wrench remove the four SCREWS (A) and WASHERS (B) securing the SEAT BACK (C). Remove
the SEAT BACK and set it aside.
 
 Step 2
 Slide the ACCESSORY TRAY (D) over the user right SEAT BACK POST (E) and down to make contact with the
SEAT HANDLEBAR (F).
 
 Step 3
 Position the UNDERSIDE CLAMP BRACKET (G) around the
SEAT HANDLEBAR (F) and tighten the two CLAMP
SCREWS and WASHERS (H).
 

 NOTE: BE CAREFUL NOT TO OVER-TIGHTEN

 THE SCREWS (H).

 
 Step 4
 Align the four holes in the SEAT BACK (B) with those in the
SEAT BACK POSTS. Insert the four SCREWS (A) and
WASHERS (B) through the backside of the SEAT BACK
POSTS (E) and into the SEAT BACK. Tighten the four
SCREWS securely.
 

 NOTE: BE CAREFUL NOT TO OVER-TIGHTEN THE