Motorola DSR315 User Manual

19

 

Complete the following steps to help you acquire a signal:

• Using the number keys on the remote control, tune to the authorization channel 

(refer to the information supplied with your system). You should see a banner 
with the channel number at the top of the screen.

• Press the OPTIONS key on the remote control. The Options menu will appear.

• From the Options menu, select option 6 (Change System Settings), and the 

System Settings menu will appear.

• Select option 3 (Change 

Installation Settings), 
and on the Installation 
Settings menu select 
option 1 (Tune in 
Satellite Signal).

• Look at the value in the 

box labelled Signal. If it 
is less than 10, make 
sure that all connections 
between the satellite 
dish LNBF and the 
satellite receiver are 
correct. If the signal 
strength remains below 10, contact your service provider for assistance.

• Using the number keys on the remote control, enter the Provider ID supplied 

by your service provider (refer to the information supplied with your system). 
You can use the

3

key on the remote control to back up and make corrections.

• If the satellite dish is pointed at the correct satellite, the large field in the center 

of the screen will turn green and display the message "Correct signal found". If 
you do not see this message within 5 to 10 minutes, the satellite dish may be 
pointed at the incorrect satellite. Contact your service provider for assistance.