ZyXEL Communications STB-1001S2 User Manual
Chapter 2 The Menu System
STB-1001S2 User’s Guide
29
2.3.3.3 Network: PPPoE
Select PPPoE in the Network menu. The following menu displays.
Figure 14 The Network: PPPoE Menu
The following table describes the labels in this menu that were not already described in table
.
2.3.4 The Advanced Setup: Firmware Upgrade Menu
Use this menu to get new firmware from the autoconfiguration server. You must be connected
to the network and have a valid autoconfiguration server address configured in the Advanced
Setup: Network menu’s ACS Server field (see
to the network and have a valid autoconfiguration server address configured in the Advanced
Setup: Network menu’s ACS Server field (see
Select Firmware Upgrade from the column on the left of the screen. The following menu
displays.
displays.
Figure 15 The Firmware Upgrade Menu
Table 9 The Network: PPPoE Menu
LABEL
DESCRIPTION
Mode
Select PPPoE to use a Point-to-Point Protocol over Ethernet
service.
service.
User Name
Enter the username for your PPPoE account.
Password
Enter the password for your PPPoE account.